Samsung WEP170 Quick Start Manual

Quick Start Guide
Bluetooth Mono Headset
WEP170
Get connected in 4 quick steps
Charge your headset
Put headset in pair mode
Pair phone with headset
Test and use
Start hear
Headquarters:
1301 East Lookout Drive Suite 150
Richardson, TX 75082
Internet Address:
http://www.samsungusa.com
Guide Number: GH68-
Before using your headset
Thank you for purchasing the Samsung Bluetooth Mono
Headset WEP170, we hope you will be delighted with
its operation.
Take a moment before you get started to familiarize
yourself with your new headset.
Volume control
buttons
Multi-Function
Indicator Light
button
Charging contact
Microphone
Put your headset in
pairing mode
Before you can use your headset, you must pair it
with your phone.
1
Ensure that the headset is off (see Turn headset
on/off on the reverse side of this guide).
2
Press and hold the Multi-Function button until
the indicator light turns on in blue
(approximately 8 seconds).
The indicator light flashes in blue as you press and
hold the Multi-Function button. Continue holding
down the button until the blue light is steadily lit.
Check phone compatibility Check phone compatibility
The Samsung Bluetooth headset WEP170 is compatible The Samsung Bluetooth headset WEP170 is compatible
1 1
with most Bluetooth with most Bluetooth (see Glossary) phones that are (see Glossary) phones that are
compliant with Bluetooth version 1.1 or higher compliant with Bluetooth version 1.1 or higher
specification and support the headset and/or hands-free specification and support the headset and/or hands-free
profile(s) profile(s) 2 2 . Ensure that your phone has Bluetooth . Ensure that your phone has Bluetooth
capability by visiting your phone manufacturer's web site. capability by visiting your phone manufacturer's web site.
Check the accessories Check the accessories
Make sure you have the following items with your Make sure you have the following items with your
headset: headset:
Bluetooth headset, Adapter, Manual Bluetooth headset, Adapter, Manual
NOTE:
Your headset supports the headset and/or hands-free
profile(s).
Trun on Bluetooth on your
phone and pair with headset
Set your Bluetooth phone to discover the headset
by following your phone's guide.
Typically, the steps involve going to a `Setup',
`Connect', or `Bluetooth' menu on your phone and
then selecting the option to discover Bluetooth
devices.
Your phone will find the Samsung WEP170 headset
and ask if you want to pair with it.
Confirm this by pressing the Yes or OK key.
If pairing was successful, the indicator light
will flash in blue 10 times rapidly before going
to flashing every 3 seconds. If unsuccessful,
the light remains on, and you will need to
re-attempt pairing.
Charge your headset Charge your headset
1 Plug the AC charging adaptor into the
headset's charging socket.
Samsung Bluetooth headset WEP170 uses a
2 Plug the AC adaptor into the electrical outlet.
rechargeable battery that must be charged
3 Charge your headset until the red light turns
fully before you use the headset for the first
time.
to blue light on headset.
4 The unit will be fully charged in approxi
mately 2 hours.
5 Remove AC charging adaptor from the
headset. You are now ready to "pair"
headset to your mobile phone. If the
headset has already been paired to your
phone, then you can begin using it.
Test and use
Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:
1
Place the headset over your ear.
See "Wearing the headset" on the reverse
sied of this guide.
2
On your phone, make a call to the number
you want.
3
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.
NOTE:
The headset cannot be used while charging.
Using your WEP170
See Features and Functions Guide
on the reverse side of this guide
for information on using your
WEP170.