Movie Clip Frame Stabiliser; Button - Samsung D830 User Manual

Movie Clip frame stabiliser

This function helps stabilise images captured during movie recording.
1. Press the E button in the Movie clip mode.
2. Press the Left / Right buttons to select the
stabilizer menu tab.
3. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
- : Movie clip frame stabiliser function
becomes disabled.
- : Prevents camera shake during movie recording.
The recording frame range will become narrower than when you
select the menu. Pre-view frames may not display smoothly
on the LCD monitor.

+ / - button

You can use the + / - button to adjust the values for the RGB, ISO, white balance
and exposure compensation.
Main menu
RGB R (Red), G (Green), B (Blue)
ISO AUTO, 50, 100, 200, 400
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
WHITE BALANCE
FLUORESCENT L, TUNGSTEN,
Exposure compensation -2.0~0.0~+2.0 (0.5EV steps)
Stabilizer
Sub menu Available camera mode
CUSTOM.
+ / - button
RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of
the images to be captured.
Setting RGB Values
1. Press the + / - button, and then use the UP and
DOWN buttons to select the RGB icon (
The RGB menu bar will appear as shown.
2. Use the UP / DOWN / LEFT and RIGHT
buttons to select the desired RGB value.
- Up / Down Button : Navigates between R, G,
and B icons.
- Left / Right Button : Changes value of each icon.
3. When you press the + / - button again, the value you set will be saved and
RGB setup mode will end.
When special effect (colour) from the icon other than
be able to select the RGB.
).
is selected, it will not
29