Movie Clip Frame Stabiliser; Button - Samsung DIGIMAX S1030 User Manual

Movie Clip frame stabiliser

■ This function helps stabilise images captured during movie recording.
1. Press the E button in the Movie clip mode.
2. Press the Left / Right buttons to select the
stabilizer menu tab.
3. Select a desired sub menu by pressing the UP/
DOWN button and press the OK button.
- : Movie clip frame stabiliser function
becomes disabled.
- : Prevents camera shake during movie recording.
The recording frame range will become narrower than when you
select the menu. Pre-view frames may not display smoothly
on the LCD monitor.

+ / - button

■ You can use the + / - button to adjust the values for the RGB, ISO, white balance
and exposure compensation.
Main menu
RGB R (Red), G (Green), B (Blue)
ISO AUTO, 80, 100, 200, 400, 800, 1000
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
WHITE BALANCE
FLUORESCENT L, TUNGSTEN,
Exposure compensation -2.0~0.0~+2.0 (0.5EV steps)
Stabilizer
Sub menu Available camera mode
CUSTOM.
+ / - button
■ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of
the images to be captured.
● Setting RGB Values
1. Press the + / - button, and then use the UP and
DOWN buttons to select the RGB icon (
The RGB menu bar will appear as shown.
2. Use the UP / DOWN / LEFT and RIGHT
buttons to select the desired RGB value.
- Up / Down Button : Navigates between R, G,
and B icons.
- Left / Right Button : Changes value of each icon.
3. When you press the + / - button again, the value you set will be saved and
RGB setup mode will end.
※ When special effect (colour) from the icon other than
be able to select the RGB.
).
is selected, it will not
《29》