Setting the On Timer
You can set the indoor unit, which is connected to the wired
remote controller, to turn on at the pre-set time.
1
Press the
Result:
Default time (0.5 hour) will be displayed
If the On Timer is already set, current time will
2
Press the
Result:
Y ou can set the time between 0.5~24 hours.
Note
0.5~3 hours : Time will be changed in 0.5 hour
3~24 hours : Time will be changed in 1 hour
3
Press
button to set the time.
Result:
'On' indicator will stop blink.
When the pre-set time passes, indoor unit will
Operation mode, temperature, fan speed, air
Note
When the On Timer is set, you can cancel it by
pressing the
When the centralized control is set, Timer will not be
effective.
Timer will be canceled if you press either
button while the Timer is already set.
Timer will be canceled if you reset the wired remote
controller.
You can set one On Timer and Off Timer each.
Timer will be canceled if you turn on the wired remote
controller with
MWR-WH00_IB_E_31218-1.indd
15
button to set the On Timer.
and the 'On' indicator will blink.
be displayed and 'On' indicator will blink.
button until you set your desired time.
unit each time you press the
button.
unit each time you press the
button.
turn on automatically.
flow direction will be same as the most recent
operation settings.
button.
button while the Timer is set.
or
15
E-
2009-12-14
ソタタ・9:47:12