Table of Contents
Advertisement
Selecting Heat Mode
The Heat mode can be select only on the heat pump models.
1
Press
(ON/OFF) button.
Result:
The air-conditioner will turn on with the mode selected when
the unit was last used.
Caution
The air-conditioner has a built-in protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
Plugged in
Stopped
The air-conditioner will start up after three minutes.
2
To select Heat mode, press
control display.
Result:
The air-conditioner will run in Heat mode.
3
To adjust the temperature, press
temperature. The temperature can be set between
16°C(61°F) and 30°C(86°F).
Result:
The temperature is adjusted by 1°C(1°F) when
button is pressed.
4
Press
button to select the fan speed until the required setting is
displayed.
Automatic(rotated :
Low
Medium
High
5
To adjust the airflow direction refer to page 18~19.
button until Heat appears on the remote
button to set the desired
)
15
E-
Hide quick links:
Advertisement
Table of Contents
