Maintenance - PROEL Sagitter BATI 4DL-H User Manual

6.3 – IR REMOTE CONTROLLER
By activating the IR receiver in the relative submenu, it is possible to control the projector with
the remote controller included
With the buttons it is possible to activate:
- AUTO MODE (AUTO button) and the relative speed (+/- buttons)
- SOUND MODE (SOUND button) and the relative speed (+/- buttons)
- Manual adjustment of each color
- Color macro
- Strobe
WARNING:
All the settings by remote controller are only temporary. When the projector is switched off
all the settings by the remote controller will be lost. In order to have the same settings after
restart, it needs that they are set by the display

7. - MAINTENANCE

To ensure optimal performance, the unit must be frequently cleaned. Unplug the device from
the mains and let it cool for at least 35 minutes to avoid the risk of burns. Use a vacuum cleaner
or an air compressor and a soft brush or a lens cloth to remove the dust deposited.
The lenses, like any other damaged part, must be replaced with original spare parts.
- In order to have a good efficiency of the battery, it is suggested to charge the battery at least
1 time each month
- the best performances of a Litium battery will be after 3 times of charge and discharge
- do not short circuit the poles of the battery in order to avoid overheating or burning. In case
of storage of battery, insulate the two poles
- if the battery is damaged, DO NOT REPAIR. It have to be changed
25