Samsung WA10V5WEP/XSG User Manual page 9

QUICK PROGRAM
If you want to wash those frequently used towels or less dirty laundry time.
Because washing is speedy, it is good for light or less stained laundry.
1. Press the Power button to "On".
2. Press the Program Select button three times.
3. Press the Start/Pause button.
Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause,
press the Start/Pause button again. You can change the program when paused.
4. Close the lid.
SOAK PROGRAM
Select this function when you wish to wash your laundry by soaking it.
1. Press the Power button to "On".
2. Press the Program Select button four times
3. Press the Start/Pause button and put the proper amount of detergent
into tub.
4.
Close the lid.
KEEPING THE TUB CLEAN
When using the machine under humid conditions for an extended time, various bacteria from the air
may stick to the tub and form black dirt (fungi), causing damage to the human body. To keep the tub
clean and hygienic at all times, it is recommended reading "CLEAN TUB PROGRAM" above and using
only dedicated or recommended detergents to clean the tub regularly at least once every one to three
months.
CLEAN TUB PROGRAM
Use this program to clean the tub. It will keep the tub clean and sanitary.
1. Press the Power button to "On".
2. Press the Program Select button five times.
3. Press the Start/Pause button.
4.
Add a delicated detergent and close the lid
- Never place laundry in the tub when cleaning inside the tub, as this can cause discoloration
or damage to the laundry.
- When doing the laundry after cleaning the tub, you may find some impurities. These are
just detergent residues and impurities after the tub cleaning. Perform the rinse cycle two to
three times.
- The Soak function (20 minutes) is set automatically.
- The water level is set to "Mid" early on and then changed to "High" during the rinse.
WA10V5-02596H_EN.indd 9
setting up your washer_9
2009-03-20 ¿ÀÈÄ 2:38:44