Control Panel - Samsung WA10V5WEP/XSG User Manual

CONTROL PANEL

For more details, see control panel of your washing machine.
9 8
POWER BUTTON
1
2 START/PAUSE BUTTON
PROGRAM SELECT
3
BUTTON
4
FILTER CHECK
REMAINING TIME,
5
DELAY START TIME,
ERROR DISPLAY
AIR TURBO BUTTON
6
FUNCTION BUTTON
7
8 WATER LEVEL BUTTON
WATER SUPPLY
9
BUTTON
WA10V5-02596H_EN.indd 7
7 6 5 4
Press this button once to operate.
Press it again to turn the power off.
Use to pause and restart the operation.
To change the washing procedure during an operation,
press this button to stop, and again to restart after changing the
procedure.
Each time the button is pressed, the washing program changes;
Fuzzy  Blanket  Wool  Quick  Soak  Clean Tub
When the wash is finished, the warning lamp lights up on the "filter
check". When the door is opened, it turns off. (This is not a fault.)
When the Magic filter is clogged, foreign materials may start sticking to
the laundry. To ensure a clean wash, please remove foreign materials
from the filter after every wash.
Displays the remaining wash time.
Displays the reserved delay start time.
Displays the error state if a problem occurs in the washing machine so
that you can take action.
Press this button to speed dry your laundry.
This function can only be selected if a spin cycle is set.
You can add this function to all programs except for the Wool program.
With every press of this button, the function changes;
Wash, Rinse, Spin  Wash  Rinse  Spin  Wash&Rinse 
Rinse&Spin  Wash,Rinse,Spin
The water level is automatically adjusted. However, you can select the
water level manually by pressing this button.
Mid  High  Mid  Low  Extra low  Low  Mid
Each time this button is pressed, the type of water is selected as
follows, Cold  Cold + Hot  Hot  Cold
3
setting up your washer_7
2009-03-20 ¿ÀÈÄ 2:38:44
2 1