Emptying The Dirty Water Tank - Bissell HYDROWAVE 2571E Manual

Emptying the Dirty Water Tank

1.
To release Dirty Water Tank,
press down on recessed button
on the top of the tank.
Tilt the tank slightly toward
you. Grab the handle and tank
with both hands and pull the
Dirty Water Tank up and away
to remove.
4.
Rinse the inside of the Dirty
Water Tank. Rinse the float
located at the bottom of the
top of the Dirty Water Tank.
If the inside area where the
Dirty Water Tank sits is dirty,
wipe it clean with a cloth.
WARNING
electrical outlet before performing maintenance or troubleshooting.
8
2.
Grab top of Dirty Water Tank in
recessed area on each side of the
Float Stack and pull upward to
remove top of tank.
The Float Stack prevents the tank
from overflowing. When the tank
is full, the Float Stack will shut
off your suction motor creating a
high-pitched sound indicating it is
time to empty your tank.
5.
Leave parts out to dry
before reassembling.
Once parts are dry, reassemble
and replace the top of Dirty
Water Tank.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
3.
Pour dirty water and
debris out.
6.
Angle the tank back into
body of machine inserting
bottom first. Tilt the top of the
tank toward the machine and
push into place until you hear
a "click".