Manual Information; Precautions - BIXOLON SRP-Q200 Manual

1. Manual Information

This manual provides information on the connection of wireless network with the printer.
This document contains proprietary information of BIXOLON and its affiliates.
You may utilize the information solely for the purpose of facilitating authorized sales and
service of, or developing software and similar products for authorized use with, BIXOLON
products, provided that such proprietary information may not be used, reproduced, or
dis-closed to any other parties for any other purpose without the prior written permission of
BIXOLON.
BIXOLON has no liability for loss or damage arising from or relating to your use of the
information in the document.
© BIXOLON Co., Ltd. All rights reserved.
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and
quality of all our products. In following, product specifications and/or user manual content
may be changed without prior notice.

2. Precautions

- The printer has to be within 100m(Outdoor) from AP(Access point) to connect
WLAN. Although 35m is able to communicate in door, WLAN could be affected by
environment to be shorten.
- The maximum separating distance may be shortened if transmission obstacles, such
as cement walls, are present.
- If a device (such as a microwave oven, wireless LAN, etc.) that uses the same
frequency is present, transmission may be interrupted. Separate the printer and
Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.
Ver. 1.00
- 3 -
SRP-Q200