Samsung VP-HMX20C User Manual page 117

Message
Activate remote control.
Number of video files is
full. Cannot record video.
Number of photo files is
full. Cannot take a photo.
Playback
Message
Not enough free space in
Memory.
Not enough free space in
Card.
Different format
Read Error
USB
Message
Fail Printer Connecting
Change 'USB Connect'
Fail USB Connecting
Change 'USB Connect'
Ink Error
Paper Error
File Error
Printer Error
Print Error
Icon Informs that...
Remote function was set to off.
Folder and files have reached capacity
-
and you can not record.
Folder and files have reached capacity
-
and you can not take a picture.
Icon Informs that...
File editing functions can not be
- performed because there is not enough
free space in the built-in memory.
File editing functions can not be
- performed because there is not enough
free space in the memory card.
• The files you want to combine are in
a different format.
- • A file you want to add in playlist has
different format with the playlist you
selected.
Some problems occurred during
-
reading data from storage media.
Icon Informs that...
A problem occurred when connecting
-
the camcorder via USB to a printer.
A problem occurred when connecting
-
the camcorder via USB to a PC.
There is a problem with the ink
-
cartridge.
- There is a problem with the paper.
- There is a problem with the file.
- There is a problem with the printer.
- A problem occurred during printing.
Action
• Set "Remote" function to "On."
• Set "File No." to "Reset."
• Set "File No." to "Reset."
Action
• Delete unnecessary files on the storage media.
• Back-up files to PC or another storage media and
delete files.
• Delete unnecessary files on the storage media.
• Back-up files to PC or another storage media and
delete files.
• It is not possible to combine two files that have
different recording format.
• It is not possible to add a file that has different
recording format with the selected playlist.
• Format storage media using menus after back-up
important files to PC or another storage device.
Action
• Check the USB cable.
• Try the connecting procedure again.
• Switch "USB Connect" function to "Mass Storage."
• Check the USB cable.
• Try the connecting procedure again.
• Switch "USB Connect" function to "PictBridge."
• Check the ink cartridge.
• Put a new ink cartridge in the printer.
• Check the paper in the printer. If there is no paper,
insert the paper.
• Your HD camcorder does not support this file format.
• Try another file recorded on your HD camcorder.
• Turn the printer's power off and on.
• Contact the printer manufacturer's service centre.
• Do not remove power source or eject memory card
during printing.
English _109