Table of Contents
Advertisement
troubleshooting
Connecting/Dubbing with other devices (TV, DVD recorder, etc.)
Symptom
You cannot dub correctly
using the component/AV
(Video, Audio L/R) cable.
General operations
Symptom
The date and time are
incorrect.
Your camcorder does not
turn on or the buttons do not
operate normally.
Your camcorder is not
recognised by a computer.
86_English
•
The component/AV (Video, Audio L/R) cable is not connected properly.
Make sure that the component/AV (Video, Audio L/R) cable is connected to the proper jack, i.e.
to the input jack of the device used for dubbing images from your camcorder.
•
This camcorder provides the two-in-one Component/AV cable that fi ts the purpose of the
component and the AV cable. Therefore, when using the component/AV cable, you must check
the right method for the TV output by setting the "TV Out " menu.
•
Has the camcorder been left unused for a long period of time?
The backup built-in rechargeable battery may be discharged.
•
Unplug the AC power adaptor, and reconnect the power supply to
the camcorder before turning it on.
•
Press the Reset button with a pointed object such as a safety clip
to initialise the system.
When the system Initialisation is complete, your camcorder
automatically turns on. The system reset function does not affect
the recorded images and custom settings.
Explanation/Solution
Explanation/Solution
page 76
page 60
page 25
Advertisement
Table of Contents
