Table of Contents
Advertisement
Format
The format function completely deletes all files and options on the storage media, including protected files.
You can format (initialise) recording data in the storage media. You have to format the pre-used storage media or
newly purchased memory cards with this camcorder before using them. This enables stable speeds and operation
when accessing the storage media.
Be aware that all files and data including protected files will be erased.
Do not format the storage media with a PC or a different device.
Make sure to format the storage media on the camcorder.
WARNING
•
Do not remove the storage media or perform any other operation (such as turning off the power) during formatting. Also, be sure to
use the provided AC power adaptor, as the storage media may be corrupted if the battery becomes exhausted during formatting. If the
storage media becomes corrupted, format it again.
•
A memory card with the protection tab set to lock will not be formatted.
•
If there is no storage media inserted, it cannot be selected and will be dimmed on the menu.
File No.
File numbers are assigned to recorded files in the order they were recorded.
settings
Assigns file numbers in sequence even if the memory card is replaced with another one or
Series
after formatting or deleting all files. The file number is reset when a new folder is created.
Resets the file number to 0001 even after formatting, deleting all files or inserting a new
Reset
memory card.
When you set "File No." to "Series," each file is assigned with a different number so as to avoid duplicating file names.
This is convenient when you want to manage your files on a PC.
Date/Time Set
Set the current date and time so they can be recorded correctly.
page 28
contents
page 25
on-screen display
None
None
English_57
Advertisement
Table of Contents
