Samsung HMX-U10RP User Manual page 92

High definition digital camcorder
Hide thumbs Also See for HMX-U10RP:
Table of Contents

Advertisement

troubleshooting
Adjusting the image during recording
Symptom
It is out of focus.
The image appears too bright or
flickering, or changes in colour.
Playback on your camcorder
Symptom
Pressing the playback (play/pause)
button did not start playing.
The skip or search function does not
work properly.
Playback is interrupted unexpectedly.
You cannot hear sound when playing a
Time Lapse recording.
Photos stored on a storage media are
not displayed in the actual size.
Playback on other devices (TV, etc.)
Symptom
You cannot view the image or hear the
sound on the connected device.
The image does not appear on the TV.
The image appears distorted on TV or
PC player.
84_English
This camcorder has no user-adjustable focus control function.
The minimum focal length between the camcorder and the subject is 1.3m.
This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury
lamp. Cancel "iSCENE" to minimise these phenomena.
Press the Mode (
) button to set the Play mode.
Image files recorded on another camcorder may not play on your camcorder.
Check out the memory card compatibility.
If the temperature inside the camcorder is too high, it cannot function properly.
Turn the camcorder off, wait for a few moments, and turn it on again.
Check if the AC power adaptor is properly connected and stable.
The Time Lapse REC function does not support sound.
Photos recorded on other devices may not appear at actual size.
This is not an error.
Connect the audio of the component/AV to your camcorder or connected device (TV,
HD recorder, etc). (Red colour- right, White colour- left)
The component/AV cable is not connected properly.
Make sure that the connection cable is connected to the proper jack.
This camcorder provides the two-in-one component/AV cable that fits the purpose of the
component and the AV cable. Therefore, when using the component/AV cable, you must
check the right method for the TV output by setting the "TV Out " menu.
Set the video output signal according to the TV colour system of the connected TV.
page 60
The display mode of the recorded video does not match that of playback device.
A video recorded in 16:9 wide mode should be played back on a TV or PC that
supports 16:9 screen mode.
Explanation/Solution
Explanation/Solution
page 28
Explanation/Solution
page 42
pages 73-74
page 60

Advertisement

Table of Contents
loading

Table of Contents