Table of Contents
Advertisement
16
English
Using the beard styler attachment without comb
Cleaning and maintenance
22_002_7381_2_DFU-Booklet_A6_v1.indd 16
You can use the beard styler attachment
without the comb to contour your beard,
moustache, sideburns or neckline to a length
of 0.5mm (1/32 in).
1 Pull the comb off the beard styler.
Note: Grab the comb in the center to pull it
off the beard styler. Do not pull at the sides
of the comb.
2 Switch on the shaver.
3 Hold the beard styler perpendicular to the
skin and move the product downwards
while you exert gentle pressure.
4 Clean the beard styler after use.
- Regular cleaning guarantees better shaving
results.
- Never clean, remove or replace the shaving
unit while the shaver is switched on.
- Do not apply pressure to shaving head
combs.
- Do not touch shaving heads with hard
objects as this may dent or damage the
precision-made slotted combs.
- Do not use abrasives, scourers or aggressive
liquids such as gasoline or acetone to clean
the shaver.
29/08/17 16:19
Advertisement
Table of Contents
