Table of Contents
Advertisement
14
English
Using the click-on attachment
Removing or attaching the click-on attachment
Using the beard styler attachment with comb
22_002_7381_2_DFU-Booklet_A6_v1.indd 14
6 Dry your face.
7
Switch off the shaver and clean it after
each use.
Note: Make sure that you rinse all foam
or shaving gel off the shaver.
1
Make sure the shaver is switched off.
2 Pull the attachment straight off the shaver.
Note: Do not twist the attachment while
you pull it off.
3 Insert the lug of the attachment into the
slot in the top of the shaver. Then press
down the attachment to attach it to the
shaver('click').
You can use the beard styler with the comb
attached to style your beard at one fixed
setting, but also at different length settings.
You can also use it to pre-trim any long hairs
before shaving for a more comfortable shave.
The length settings on the beard styler
attachment correspond to the remaining hair
length after cutting and range from 1 to 5mm
(3/64 - 3/16in).
29/08/17 16:19
Advertisement
Table of Contents
