Samsung ML-3750ND User Manual page 43

Basic printing
3
Press OK select the mode you want.
• Default Mode: Select this to turn on or off the eco mode.
(Duplex (long edge)/Toner save/2-up/Skip blank pages)
- Off: Set the eco mode off.
- On: Set the eco mode on.
If you set the eco mode on with a password from the
SyncThru™ Web Service ( Settings tab > Machine Settings >
System > Eco > Settings), the Onforce message appears.
You have to enter the password to change the eco mode
status.
• Change Temp.: Select the eco template.
- Default Eco: The default setting of eco mode is duplex,
2-up, skip blank pages, and toner save.
- Custom Eco: Follow the settings from Syncthru™ Web
Service. Before you select this item, you must set the
eco function in SyncThru™ Web Service> Settings tab
> Machine Settings > System > Eco > Settings.
Setting eco mode on the driver
Open the Eco tab to set eco mode. When you see the eco image
( ), that means the eco mode is currently enabled.
► Eco options
• Printer Default: Follows the settings from the machine's control
panel.
• None: Disables eco mode.
• Eco Printing: Enables eco mode. Activate the various eco items
you want to use.
• Password: If the administrator fixed to enable the eco mode, you
have to enter the password to change the status.
► Result simulator
Result Simulator shows the results of reduced emission of carbon
dioxide, used electricity, and the amount of saved paper in
accordance with the settings you selected.
• The results are calculated on the basis that the total number of
printed paper is one hundred without a blank page when the eco
mode is disabled.
• Refer to the calculation coefficient about CO2, energy, and paper
from IEA, the index of Ministry of Internal Affairs and
Communication of Japan and www.remanufacturing.org.uk.
Each model has a different index.
• The power consumption in printing mode refers to the average
printing power consumption of this machine.
2. Learning the basic usage 43