Samsung ML-2165 User Manual page 192

Operating system problems
4
Common PostScript problems
The following situations are PS language specific and may occur when several printer languages are used.
Problem
The PostScript file cannot be
printed.
Limit Check Error report prints. The print job was too complex.
A PostScript error page prints.
The optional tray is not
selected in the driver.
Possible cause
The PostScript driver may not be installed
correctly.
The print job may not be PostScript.
The printer driver has not been configured to
recognize the optional tray.
• Install the PostScript driver (see "Software installation" on page 82).
• Print a configuration page and verify that the PS version is available for
printing.
• If the problem persists, contact a service representative.
You might need to reduce the complexity of the page or install more memory.
Make sure that the print job is a PostScript job. Check to see whether the software
application expected a setup or PostScript header file to be sent to the machine.
Open the PostScript driver properties, select the Device Options tab, and set the
tray option.
Solution
5. Troubleshooting
192