System Requirements - Samsung ML-1670 User Manual

System requirements

Before you begin, ensure that your system meets the following
requirements:
Windows
Your machine supports the following Windows operating systems.
Requirement (recommended)
OPERATING
SYSTEM
CPU
Windows® Intel® Pentium® II 400
2000 MHz (Pentium III 933
MHz)
Windows® XP Intel® Pentium® III 933
MHz (Pentium IV 1 GHz)
Windows Intel® Pentium® III 933
Server® 2003 MHz (Pentium IV 1 GHz)
Windows Intel® Pentium® IV 1 GHz
(Pentium IV 2 GHz)
Server® 2008
Windows Intel® Pentium® IV 3 GHz
Vista®
Windows® 7 Intel® Pentium® IV 1 GHz
32-bit or 64-bit processor
or higher
• Support for DirectX® 9 graphics with 128 MB
memory (to enable the Aero theme).
• DVD-R/W Drive
Windows Intel® Pentium® IV 1 GHz
Server® 2008 (x86) or 1.4 GHz (x64)
R2 processors (2 GHz or
faster)
• Internet Explorer 6.0 or higher is the minimum requirement for all
Windows operating systems.
• Users who have administrator rights can install the software.
• Windows Terminal Services is compatible with this machine.
• For Windows 2000, Services Pack 4 or higher is required.
Macintosh
Requirements (recommended)
OPERATING
SYSTEM
CPU
Mac OS X • Intel®
10.3 ~ 10.4 Processors
• PowerPC G4/ G5
free HDD
RAM
space
64 MB 600 MB
(128 MB)
128 MB 1.5 GB
(256 MB)
128 MB 1.25 GB to
(512 MB) 2 GB
512 MB 10 GB
(2048 MB)
512 MB 15 GB
(1024 MB)
1 GB (2 16 GB
GB)
512 MB 10 GB
(2048 MB)
free HDD
RAM
space
• 128 MB for a 1 GB
PowerPC based
Mac (512 MB)
• 512 MB for a
Intel-based Mac
(1 GB)
Getting started_ 22
Requirements (recommended)
OPERATING
SYSTEM
CPU
Mac OS X • Intel®
10.5 Processors
• 867 MHz or
faster Power PC
G4/ G5
Mac OS X • Intel®
10.6 Processors
Linux
Item
Operating RedHat Enterprise Linux WS 4, 5
system
Fedora 4, 5, 6, 7, 8, 9, 10, 11, 12
SuSE Linux 10.0, 10.1
OpenSuSE 10.2, 10.3, 11.0, 11.1, 11.2
Mandriva 2005, 2006, 2007, 2008, 2009, 2009.1
Ubuntu 5.04, 5.10, 6.06, 6.10, 7.04, 7.10, 8.04, 8.10,
9.04, 9.10, 10.04
SuSE Linux Enterprise Desktop 10, 11
Debian 4.0, 5.0
CPU Pentium IV 2.4 GHz (Intel Core™2)
RAM 512 MB (1024 MB)
Free HDD space 1 GB (2 GB)
Installing USB connected machine's driver
A locally connected machine is a machine directly connected to your
computer by a USB cable.
Only use a USB cable no longer than 3 m (10 ft.).
Windows
You can install the machine software using the typical or custom method.
The following steps are recommended for most users who use a machine
directly connected to your computer. All components necessary for machine
operations will be installed.
1. Make sure that the machine is connected to the computer and powered
on.
If the "Found New Hardware Wizard" window appears during the
installation procedure, click Cancel to close the window.
2. Insert the supplied software CD into your CD-ROM drive.
• The software CD should automatically run and an installation window
will appear.
• If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your CD-ROM Drive. Click OK.
• If you use Windows Vista, Windows 7 and Windows 2008 Server R2
click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your CD-ROM Drive and click OK.
• If the AutoPlay window appears in Windows Vista, Windows 7 and
free HDD
RAM
space
512 MB (1 GB) 1 GB
1 GB (2 GB) 1 GB
Requirements