Samsung CLP-775ND User Manual page 75

Message Meaning
Prepare Fuser unit The life of the fuser
unit will expired soon.
Prepare new fuser
unit
Replace Fuser unit The life of the fuser
unit has expired.
Replace with new
fuser unit
Fuser unit Not The fuser unit is not
Installed installed.
Fuser unit is not
installed.
Install it
Jam bottom of Paper has jammed
duplex during duplex printing.
Jam top of duplex
Jam inside Paper has jammed in
machine cartridge area.
Jam in exit area Paper has jammed in
exit area.
Error: [aaa] There is a problem in
the machine.
LSU Unit Failure:
[aaa]
Turn off then on
Not proper room The machine is in a
temp room with improper
room temperature.
Not proper room
temperature.
Change room
temperature
Error: [aaa] There is a problem in
the machine.
Actuator Motor
Failure: [aaa]
Call for service
Output bin Full The document output
tray is full.
Output bin Full.
Remove printed
paper
Paper Empty in MP There is no paper in
the multi-purpose tray.
Paper is empty in
MP tray.
Load paper
Paper Empty in There is no paper in
tray[yyy] the tray.
Paper is empty in
tray[yyy].
Load paper
Paper Jam in MPT Paper has jammed in
the multi-purpose tray
area.
Paper Jam in tray 1 Paper has jammed in
the tray1 area.
Suggested solutions
Call for service.
Call for service.
Call for service.
Clear the jam. (See "In
the duplex unit area" on
page 72.)
Clear the jam. (See "In
the fuser unit area" on
page 71.)
Clear the jam. (See "In
exit area" on page 72.)
Turn the machine off and
turn it on again. If the
problem persists, call for
service.
Move the machine to a
room with proper room
temperature. (See
"General specifications"
on page 91.)
Turn the machine off and
turn it on again. If the
problem persists, call for
service.
Once the paper is
removed from the
document output tray, the
printer resumes printing.
Load paper in the
multi-purpose tray. (See
"Multi-purpose tray" on
page 44.)
Load paper in the tray.
(See "Tray 1 / optional
trays" on page 43.)
Clear the jam. (See "In
the multi-purpose tray" on
page 71.)
Clear the jam. (See "In
tray 1" on page 70.)
Troubleshooting_ 75
Message Meaning
Paper Jam in tray 2 Paper has jammed in
the tray2 area.
Paper Jam in tray 3 Paper has jammed in
the tray3 area.
Paper mismatch There is no
MPT corresponding paper
in the corresponding
Load [zzz] [xxx]
multi-purpose tray.
Continue Cancel
Paper mismatch There is no
tray[yyy] corresponding paper
in the corresponding
Load [zzz] [xxx]
tray.
Continue Cancel
Replace retard The life of the tray
roller Retard roller has
expired.
Replace with new
Tray[yyy] retard
roller
Replace dust The life of the Dust
cleaning Cleaning Kit has
expired.
Replace with new
dust cleaning kit
Replace [ccc] toner The toner cartridge
has reached the end
Replace with New
of its lifespan.
[ccc] Toner
Self Diagnostics The engine in your
mode... printer is checking
some problems
detected.
Sensor Failure There is a problem in
the sensor signal.
[aaa]
Turn off then on
System error There is a problem in
the machine.
Error: [aaa]
Turn off then on
Prepare TR. belt The life of the transfer
belt will expired soon.
Prepare new Paper
transfer belt unit
Suggested solutions
Clear the jam. (See "In
optional trays" on
page 70.)
Clear the jam. (See "In
optional trays" on
page 70.)
Load corresponding
paper in the
corresponding
multi-purpose tray. (See
"Multi-purpose tray" on
page 44.)
Load corresponding
paper in the
corresponding tray. (See
"Tray 1 / optional trays"
on page 43.)
Call for service.
Call for service.
Replace the toner
cartridge with a
Samsung-genuine toner
cartridge. (See
"Replacing the toner
cartridge" on page 84.)
Please wait a few
minutes.
Turn the machine off and
turn it on again. If the
problem persists, call for
service.
Turn the machine off and
turn it on again. If the
problem persists, call for
service.
Order the transfer belt
with a new one.