Samsung CLX-6220FX User Manual page 114

Message Meaning
Replace new [ccc] The indicated toner
toner cartridge has almost
reached its estimated
Replace with new
cartridge life. The
[ccc] toner cartridge
machine might stop
printing.
Estimated cartridge
life means the
expected or
estimated toner
cartridge life, which
indicates the
average capacity of
print-outs and is
designed pursuant
to ISO/IEC 19798.
The number of
pages may be
affected by the
percentage of
image area,
operating
environment,
printing interval,
media type and
media size. Some
amount of toner
may remain in the
cartridge even
when red LED is
turns on and the
printer stops
printing.
[ccc] toner Not The toner cartridge you
Compatible have installed is not for
your machine.
[ccc] toner cartridge
is not compatible.
Check guide
Suggested solutions
• You can choose Stop
or Continue as
shown on the control
panel. If you select
Stop, the printer
stops printing and
you cannot print any
more without
changing the
cartridge. If you
select Continue, the
printer keeps printing
but the printing
quality cannot be
guaranteed.
Replace the toner
cartridge for the best
print quality when this
message appears.
Using a cartridge
beyond this stage
can result in printing
quality issues. (See
"Replacing the toner
cartridge" on page 2)
Samsung does
not recommend
using
non-genuine
Samsung toner
cartridge such
as refilled or
remanufactured
. Samsung
cannot
guarantee
non-genuine
Samsung toner
cartridge's
quality. Service
or repair
required as a
result of using
non-genuine
Samsung toner
cartridges will
not be covered
under the
machine
warranty.
• If the machine stops
printing, replace the
toner cartridge (See
"Replacing the toner
cartridge" on page 2).
Install a
Samsung-genuine toner
cartridge, designed for
your machine.
Troubleshooting_ 9
Message Meaning
[ccc] toner Not The toner cartridge is not
Installed installed or the CRUM
(Consumer Replaceable
[ccc] toner cartridge
Unit Monitor) in the
is not installed.
cartridge is not properly
Install it
connected.
[ccc] Toner Not The machine cannot
Installed detect a toner cartridge.
[ccc] Toner is not
installed.
Remove seal tape &
reinstall
Group You have tried to select a
group location number
Not Available
where only a single
location number can be
used, such as when
adding locations for a
multiple send operation.
Data Read Fail Time expired while
reading date.
Check USB Memory
Data Write Fail Storing to the USB
memory failed.
Check USB Memory
Door is open. The door is not securely
latched.
Close it
Door is open or The front door is not
securely latched.
Check Transfer belt
IP Conflict The IP address is used
elsewhere.
This IP address
conflicts with that
of other system
Connection Error Connection with the
SMTP server failed.
Enter Again You entered an
unavailable item.
Fax memory is The fax memory is full.
almost full
Fan error There is a problem in the
machine.
Error: [aaa]
Turn off then on
Fuser error There is a problem in the
machine.
Error: [aaa]
Turn off then on
Fuser unit Not The fuser unit is not
Installed installed.
Fuser unit is not
installed.
Install it
Suggested solutions
Reinstall the toner
cartridge two or three
times. If the problem
persists, the toner
cartridge is not being
detected. Call for
service.
Remove the sealing
tape from the toner
cartridge.
Refer to Quick Install
Guide.
Use a speed dial
number or dial number
manually using the
number keypad.
Try again.
Check the available
USB memory space.
Close the door until it
locks into place.
Close the front door
until it locks into place.
Check the IP address or
obtain a new IP
address.
Check the server
settings and the
network cable.
Enter the correct item
again.
Delete unnecessary fax
jobs and retransmit after
more memory becomes
available. Alternatively,
split the transmission
into more than one
operation.
Turn the machine off
and turn it on again. If
the problem persists,
call for service.
Turn the machine off
and turn it on again. If
the problem persists,
call for service.
Call for service.