Using Rinse Mode - Hoover Power Scrub Elite User Manual

OPERATION
5
Plug into the mains,
press the on/off pedal
to switch on.

Using Rinse mode

Turn the wash/rinse
dial to rinse. Only
water is released
to remove solution
residue.
Press the recline
pedal and pull the
handle backwards.
For best results apply
water on the forward
stroke and release
the trigger to pick
up water on the
backward stroke.
Follow with a slow
additional dry stoke
without the trigger
pressed for a
dryer finish.
Squeeze the trigger to
release solution and
water mix.
NOTE: For best cleaning results use slow
straight parallel strokes. Intermittent dry
forward strokes will increase water pick up.
For best results apply
water/solution on the
forward stroke and
release the trigger to
pick up water/solution
on the backward
stroke. Follow with
a slow additional
dry stoke without the
trigger pressed for a
dryer finish.