Technical Information
4
Service
4.1
Door Seal Removal
1. Open the door.
2. Carefully, without using tools, pull the rubber door seal out of its groove.
Note:
When re-installing the door seal, pay attention to the correct placement at the
corners.
4.2
Removing the Door Outer and Middle Panes
1. Open the door a few inches.
2. Using a pointed tool, push in the two silver notches on the door's upper
edge until you hear it click (Figure 020-1, Item 1).
3. Tilt the outer pane a few inches forward, pulling the pins of the door
contact switches from their slots (Figure 020-1, Item 2).
Figure 020-1: Door Pane Removal
44
H 408x BM