Faq - Samsung SyncMaster LD220HD User Manual

5-3

FAQ

FAQ
How can I change the frequency of the video sig-
nal?
How can I change the resolution?
How can I use the power saving function?
How can I clean the outer case/LCD Panel?
Can I watch digital TV broadcasting with an ana-
log TV?
Can I use my present antenna to receive digital
broadcasting?
Troubleshooting
PLEASE TRY THE FOLLOWING!
You have to change the frequency of the graphics card.
(For more information, refer to the User Manual of the computer or the
graphics card.)
Windows XP: Change the resolution by selecting Control Panel → Appear-
ance and Themes → Display → Settings.
Windows ME/2000 : Change the resolution by selecting Control Panel →
Appearance and Themes → Display → Settings.
(For more information, refer to the User Manual of the computer or the
graphics card.)
Windows XP: Configure it by selecting Control Panel → Appearance and
Themes → Display → Screen Saver Settingor configure it in the BIOS
SETUP of the computer.
Windows ME/2000 : Configure it by selecting Control Panel → Appearance
and Themes → Display → Screen Saver Settingor configure it in the BIOS
SETUP of the computer.
For more information, refer to the Windows user manual for the computer.
Disconnect the power cord and then clean the monitor with a soft cloth,
using either a plain water.
Do not leave any detergent or scratches on the case.
Do not let any water enter the monitor.
No.
The analog TV cannot interpret digital signals. Therefore, a digital TV is
required to watch digital TV broadcasting.
As for existing analog TV, digital TV is designed so that digital broadcast-
ing signals are received via both indoor and outdoor antennas.
If signal reception is very good in your environment, you can watch digital
broadcasts with your existing indoor antenna. If not, it is better to install an
outdoor antenna.
5-3