Samsung SyncMaster LD220HD User Manual page 32

MENU
Mode
MagicAngle
Backlight / Contrast /
Brightness / Sharp-
ness / Colour / Tint (G/
R)
3-5
You can select the type of picture which best corresponds to your viewing requirements.
You can activate either <Dynamic>, <Standard>, or <Movie>.
• <Dynamic>
Selects the picture for high-definition in a bright room.
• <Standard>
Selects the picture for optimum display in a normal environment.
• <Movie>
Selects the picture for viewing movies in a dark room.
Press the [TOOLS] button to display the Tools menu. You can also set the <picture mode> by
selecting <Tools> → <Picture Mode>.
This feature allows you to see optimal screen quality according to your viewing position.
When viewing the screen at an angle from below, above or the side of the monitor, by setting the
appropriate mode for each position you can obtain a similar picture quality as viewing the screen
directly from the front.
Set to <OFF> when viewing directly in front of the screen.
• <Off> - Select when viewing from the front position.
• <Lean Back Mode1>
• <Lean Back Mode2>
• <Standing Mode> -Select when viewing from the upper position.
• <Side Mode> - Select when viewing from the left or right position.
Press the [TOOLS] button to display the Tools menu. You can also set the <MagicAngle> by
selecting <Tools> → <MagicAngle>.
The <TV>, <Component>, <Ext.> and <HDMI> modes only support the <Lean Back Mode1>
and <Lean Back Mode2> menus.
Your product has several setting options that allow you to control the picture quality.
• <Backlight > - Adjusts the brightness of LCD back light.
• <Contrast> - Adjusts the contrast level of the picture.
• <Brightness> - Adjusts the brightness level of the picture.
• <Sharpness> - Adjusts the edge definition of the picture.
• <Colour> - Adjusts color saturation of the picture.
• <Tint (G/R)> - Adjusts the color tint of the picture.
It is activated when the signal is NTSC.
DESCRIPTION
- Select when viewing from a slightly lower position.
- Select when viewing from the lower position.
Using the Product