2. Connect the [HDMI/PC/DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of the PC.
3. Connect one end of the power cord to the [ POWER ] port of the product and connect the other end of the power cord to the
110V or 220V wall outlet.
(The input voltage is switched automatically.)
•
You may enjoy clear and quality sound from the computer sound card using the monitor's speakers. (You don't need to
install separate speakers for your computer.)
•
If you connect your monitor properly using the DVI connector but get a blank or fuzzy screen, check to see if the monitor
status is set to analog. Press [
Use a general monitor in the following cases.
•
When using a single display
•
When playing a 3D game
•
When watching a BluRay or HD video
•
For laptop, "LCD+CRT Dual View" mode must be selected first before the multi-monitor configuration.
•
Press the Fn + F4(
•
Then the 'Easy Display Manager'screen appears in which you can select a display device. Whenever you press the
F4(
) key while holding down the Fn key, the selected option is changed.
Installing the Product
] button to have the monitor double-check the input signal source.
) key combination once.
2-2