Rails Replacement - Western Digital OpenFlex Data24 DCS0010 User Manual

User Guide
Figure 73: Connect Power Cable
3.7 Rails Replacement
ESD Mitigation Equipment (site specific)
• ESD Sensitive
• Electric Shock
• Fan Blade Danger
• Safe Lift: Under 50 lbs.
• Safe Lift: Over 50lbs.
Step 1 : Unpack and inspect the new Rails for damage.
a. Inspect the packaging that the Rails replacement was shipped in and record any damage to
the box. Large cuts, open boxes, and crushed corners should be reported.
b. Remove the Rails from the packaging and verify that there is no damage to the Rails. Dents,
scratches, and broken parts should be reported. If major damage has occurred to the Rails,
DO NOT use the replacement part.
c. Store in a safe location until the Rails is needed for installation.
Step 2 : Disconnect the power and data cables from the enclosure.
a. Unclip the retention strap as shown in the following image.
Replacement Requirements
Personnel Required
Service Window
Tool
T15 Torx Screwdriver
Level
Lift Equipment
# Needed
1
1
1
1
3. Support

3.7 Rails Replacement

1
N/A
Required vs. Optional
Required
Optional
Optional
Required
56