Leds - Western Digital OpenFlex Data24 DCS0010 User Manual

User Guide
1.2.1 LEDs
Enclosure LEDs
Figure 2: Enclosure LEDs
Table 1: Enclosure LED Flash Patterns
LED Name
Identification
Power
Service State
Fault
Color
White Blink @ 1 Hz: Blinks only when Identification has
been activated. Will blink when any component
is identified, e.g. Fans, PSUs, etc.
Off: Enclosure not being identified/located
Green Blink @ 1Hz: Enclosure is booting
3Hz Quick Flash: Enclosure is in standby mode.
Solid: Enclosure is powered on
Off: Enclosure is powered off
Blue Solid: Enclosure is serviceable
Off: Enclosure is not serviceable
Amber Solid: Enclosure has a fault
Off: Enclosure has no fault
1. Overview
1.2 Design Details
Behavior
4