Step 2 Connecting - Sony VPL-PHZ60 Setup Manual

Step 2
Notes
 Turn off all devices before making any connections.
 Use the proper cables for each connection.
 Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a
malfunction. When unplugging a cable, be sure to grip the plug, not the cable itself.
 For more information, refer also to the instruction manual of the device to be connected.
Connecting to a Computer
Connect the INPUT B or INPUT C terminal to the HDMI output terminal on the computer.
Notes
 Use HDMI-compatible device which has the HDMI Logo.
 Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are recommended.)
 The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) signal or CEC (Consumer Electronics
Control) signal.
40
GB
Connecting
Connecting
HDMI cable (not supplied)