Technical Specifications - Graco XM Series Repair Parts

Technical Specifications

Technical Specifications
XM Plural-Component Sprayers
Mixed ratio range
Ratio tolerance range (before alarm)
Fluid Viscosity Range†
Fluid filtration, standard on pump outlets*
Air Filtration
Weight
Base sprayer (XM1L00 and XM5L00 models)
Add component weights to base sprayer weight
for your specific model weight.
Dimensions
See Dimensions, page 98.
Inlet/Outlet Sizes
Air inlet size
Fluid inlet size, without feed kits
Ambient temperature range
Operating
Storage
Maximum fluid working pressure of mixed material
50:1
70:1
Maximum fluid temperature
Air supply pressure range
Maximum pump air set pressure
50:1
70:1
Maximum pump inlet fluid feed pressure
Maximum air consumption at
100 psi (0.7 MPa, 7.0 bar) in scfm (m^3/min.)
Flow Rates
Minimum* *
Maximum
Notes
† Heavier viscosities can be mixed using heat, circulation, and pressure feeding.
* Filter assembly is not included on some models.
* * Minimum flow rate is dependent on material being sprayed and mixing capability. Test your material specific to flow rate.
Environmental conditions rating
Indoor/outdoor use
Altitude
Maximum relative humidity
104
US
1:1–10:1 (in 0.1 increments)
200-20,000 cps (heavier viscosities can be mixed using heat,
circulation, and/or pressure feeding)
60 mesh
40 micron main filter, 5 micron control air filter;
see pump performance charts in your Operation manual
742 lb
32–135 °F
30–160 °F
5200 psi
6300 psi
160 °F
50–150 psi
100 psi
90 psi
250 psi
70 scfm per gpm (1.96 m^3 min. per lpm)
1 quart per minute
3 gallons per minute
To 99% up to 130°F
Metric
+/- 5%
238 micron
336.87 kg
1.0 in. npt(f)
1 1/4 npt(m)
0–57 °C
-1–71 °C
35.8 MPa, 358 bar
43.5 MPa, 435 bar
71 °C
0.35–1.0 MPa, 3.5–10.3 bar
0.68 MPa, 6.8 bar
0.62 MPa, 6.2 bar
1.7 MPa, 17 bar
0.95 liters per minute
11.4 liters per minute
Up to 4000 m
To 99% up to 54°C
313289W