Table of Contents
Advertisement
2.
Click Settings tab > Advanced > GeForce FX Go5200 32M/64M tab in the
[Display Properties] dialog box.
3.
Select the nView Display Mode item, and then configure Display to 'Analog
Display'.
4.
Right-click on the Analog display device figure, and then click on Screen
Adjustment.
5.
Select 'Fixed Aspect Ratio Timing' on the Display Timing tab, and then click
Apply. The entire desktop will now display on the screen of the display device.
Q12 A DVD or MPEG file is displayed only on the LCD screen.
A
Even though both LCD and CRT are configured as display devices, in basic
setup, only one of the selected devices plays video.
1.
Right-click on the desktop using the touchpad, and then select Properties.
2.
Click Settings tab > Advanced > GeForce FX Go5200 32M/64M tab in the
[Display Properties] dialog box.
3.
Select the Overlay Controls item, configure Full Screen Device to 'Primary
Display' or 'Secondary Display', and then click Apply. Now you can view video
through both of the LCD and CRT screens.
Troubleshooting 85
Advertisement
Table of Contents
