Monitoring The Battery Charge - Samsung NX30PRT000 User Manual

Using the bridge battery
Your computer has a bridge battery, which supplies power for a short time
even when there is no battery installed. Thus you can exchange a battery in
standby mode, without turning the computer completely off. When you are
exchanging the battery in standby mode, exchange in 3 minutes.

Monitoring the Battery Charge

To monitor using a shortcut key
Press <Fn>+<F2/
To monitor on the battery
Remove the battery from the computer, and press the PUSH button on the battery to
view the approximate remaining battery charge (%).
Using the battery
The battery has an expendable supply, so when you use it for a long time, the
capacity/battery life is shortened. If the battery life is reduced to under half of
the initial time, we recommend that you purchase a new battery to use.
Battery Warning
You will hear an alarm when the remaining battery charge is under 10%.
Connect the power cable or turn off the computer and install a fully charged
battery.
When the remaining battery charge is under 3%, the computer automatically
saves current work and turns off. This may be different according to the
settings in Control Panel > Performance and Maintenance > Power
Options > Alarms tab.
> keys to view the remaining battery charge. (p10)
System Management 73