Table of Contents
Advertisement
Upgrading Memory
This computer has one or more memory module(s). Two memory module sockets are
provided so that you can replace memory or install an additional memory module.
Removing the memory module
Before removing or replacing the memory module, turn the system off
completely and remove the battery and AC adapter. Do not replace the
memory module when the system is in Standby or Hibernation mode.
When using memory in dual channel, using memory of the same specification
(the same capacity and manufacturer) is recommended.
1. Using a screwdriver, open the memory module compartment cover on the bottom
of the computer.
2. Push the memory module tabs outward to pop the memory module upwards.
Carefully pull the module out at an angle of about 30
screw
°
.
System Management 113
Advertisement
Table of Contents
