Table of Contents
Advertisement
Connecting yepp to PC with USB cable
4
Charge the battery on the yepp player, and
then press √» to turn on the power.
5
Connect one end of the USB cable to the
USB port on your PC.
6
Open the yepp player's upper door and
connect the other end of the USB cable to
the USB cable socket.
7
A message appears, indicating that a new
device has been found, and the USB driver
will be installed. If the USB driver does not
install automatically, restart your PC and try
again.
16
8
Once the USB driver is installed, "SAMSUNG YP-900" or
"USB Mass Storage Device" appears in Device Manager.
N N
o o
t t
e e
N N
o o
t t
e e
How to check USB driver
How to check USB driver
Windows 98:
Control Panel
System
Device Manager
Windows 2000 Professional:
Control Panel
System
Hardware
Device Manager
Windows XP Professional:
Control Panel
Performance and Maintenance
System
Hardware
Device Manager
9
If the USB driver does not show as installed in Device Manager,
refer to the section on "Manual Installation of USB Driver".
17
Advertisement
Table of Contents
