Manual Installation of the USB Driver
Go to "Downloading/Uploading files" on page 20 if the USB driver is in place.
Follow these steps if the USB driver is not in place :
When an error occurs during installation of the USB driver
1
Check the device manager.
Windows 98/ME:
G
Control Panel ¡ System ¡ Device Manager
Windows 2000 (Professional):
G
Control Panel ¡ System ¡ Hardware ¡
Device Manager
G
Windows XP (Professional):
Control Panel ¡ System ¡ Hardware ¡
Device Manager
2
Check if there is a device listed with an
exclamation point or a question mark
(displayed as unknown device or USB device).
3
Double click on the device listed with an exclamation
point or a question mark.
16
N N
o o
t t
e e
N N
o o
t t
e e
G
If you are using Windows 2000 and your version of Windows does not recognize the USB driver
please download and install the latest service pack from windowsupdate.microsoft.com
G
The installation method may vary depending on the type of PC or operating system.
Contact your PC dealer or service center for installation information.
G
If errors occur continuously when you install the USB driver,
reconnect the USB cable after rebooting your system.
4
5
After selecting the driver,
click on [Update Driver].
Select a compatible driver,
click on [Next] to finish.
17