Connecting The Fm Antenna; Before Using Your Home Theater - Samsung HT-XA100 User Manual

connections

CONNECTING THE FM ANTENNA

1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2. Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it
to a wall or other rigid surface.
M

This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit
may rise and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered
with a newspaper or cloth, heat may build up inside the unit and fi re may result.)
26

before using your home theater

The DVD Home Theater's remote can be used to control Samsung TVs.
FM Antenna
(supplied)
1. Plug the main unit's power cord into the AC power supply.
2. Press the DVD RECEIVER button to switch to DVD
RECEIVER mode to operate the DVD Home Theater.
3. Press the FUNCTION button on the main unit or DVD
button on the remote to enable DVD/CD playback.
4. Press the TV button to set the remote to TV mode.
5. Press the POWER button to turn on your Samsung TV with
this remote.
6. Press the TV/VIDEO button to select VIDEO mode on your
TV.
VIDEO
27