Setting The Delay Time; Setting The Test Tone; Setting The Audio - Samsung HT-XA100 User Manual

system setup

SETTING THE DELAY TIME

If the speakers cannot be placed at equal distances from the listening
position, you can adjust the delay time of the audio signals from the center
and rear speakers.
1. In Stop mode, press the MENU button.
Press the Cursor ▼ button to move to Audio and then press the
2.
ENTER or ► button.
Press the Cursor ▼ button to move to DELAY TIME and then press
3.
the ENTER or ► button.
4. Press the ENTER button.
Press the Cursor ◄, ► button to set the Delay time.
5.
•
You can set the delay time for C between 00 and 05mSEC and for
SL and SR between 00 and 15mSEC.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each
speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can
adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers.
Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the distance of Df
in the fi gure, set the mode as 0ms. Otherwise, change the
setting according to the table.
Distance between
0.00 m 0.34 m 0.68 m 1.06 m 1.40 m
Df and Dc
Delay Time 0 ms 1 ms 2 ms 3 ms 4 ms
Setting REAR SPEAKER
If the distance of Dc is equal to or longer than the distance of Df
in the fi gure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between
0.00 m 1.06 m 2.11 m 3.17 m 4.23 m
Df and Dc
Delay Time 0 ms 3 ms 6 ms 9 ms 12 ms
M

With PL II (Dolby Pro Logic II), the delay time may be different for each mode.

With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

The Center channel is only adjustable on 5.1 channel discs.
48
Ideal CENTER SPEAKER
placement
1.76 m
5 ms
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
5.29 m
Ds: The distance from SURROUND SPEAKER
15 ms

SETTING THE TEST TONE

Use the Test Tone feature to check the speaker connections.
1. In Stop mode, press the MENU button.
Press the Cursor ▼ button to move to Audio and then press the
2.
ENTER or ► button.
Press the Cursor ▼ button to move to TEST TONE and then press
3.
the ENTER or ► button.
•
The test tone will be sent to L C
order.
•
If the ENTER button is pressed again at this time, the test tone
will stop.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.

SETTING THE AUDIO

You can adjust the balance and level for each speaker.
1. In Stop mode, press the MENU button.
Press the Cursor ▼ button to move to Audio and then press the
2.
ENTER or ► button.
Press the Cursor ▼ button to move to SOUND EDIT and then
3.
press the ENTER button.
Press the Cursor ▲, ▼ button to select and adjust the desired item.
4.
Press the Cursor ◄, ► button to adjust the settings.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
MOVE ENTER RETURN
R SR SL SW in
STOP
MOVE ENTER RETURN EXIT
MOVE CHANGE
RETURN
EXIT
EXIT
EXIT
49