Connecting Audio From External Components - Samsung HT-TX500 Instruction Manual

Connecting Audio from External Components

AUX2 : Rear Panel
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
Be sure to match connector colors.
2
Press the AUX button on the remote control to select <AUX2> input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD D.IN 1
• You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
24
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect
either left or right.
D.IN 2 AUX 1 AUX 2 USB FM.
(Con't)
OPTICAL : Rear Panel
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1
Connect the Digital Input (OPTICAL 1 or 2) on the Home Theater to the Digital Output of the external digital
component.
2
Press the AUX button on the remote control to select <D.IN 1>,<D.IN 2>.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD
Optical Cable
(not supplied)
D.IN 1 D.IN 2 AUX 1 AUX 2 USB FM.
GB
25