Toyota HIACE 2006 Owner's Manual page 97

The display contains the odometer, two
trip meters and meter brightness indica-
tor that appears when the tail lights/
headlights are on. You can adjust the
brightness when displayed.
The key must be in the "ON" position. The
display remains on for 10 minutes after
the ignition is turned to the "ACC" or
"LOCK" position.
To change the meter display, quickly push
and release the knob. The meter display
changes in the order from the odometer
to trip meter A to trip meter B to meter
light control (when tail lights/headlights are
turned on), then back to the odometer
each time you push it.
1. Odometer: It shows the total distance
the vehicle has been driven.
2. Two trip meters: They show two differ-
ent distances independently driven
since the last time each trip meter was
set to zero.
You can use one trip meter to calculate
the fuel economy and the other to
measure the distance on each trip. All
trip meter data is cancelled if the elec-
trical power source is disconnected.
88
To reset trip meter A to zero, display
the meter A reading, then push and
hold the knob until the meter is set to
zero. The same process can be applied
for resetting trip meter B.
3. Meter light control display: You can ad-
just the brightness by 4 levels.
To adjust the brightness, push and hold
the knob until the desired brightness is
obtained.