Toyota HIACE 2006 Owner's Manual page 175

Put the jack handle, jack handle extension
and jack handle end together as shown in
the illustration.
1. Jack handle end
2. Jack handle extension
3. Jack handle
166
When connecting the jack handle exten-
sion and jack handle end, use the jack
handle to tighten the bolt on the joint as
shown in the illustration.
When you tighten the bolt, make sure that
it fits into the depression on the joint.
NOTICE
Tighten all joints securely. Otherwise,
the extension may come off and it
may damage the paint or vehicle
body.
-Raising your vehicle
6. After making sure that no one is in
the vehicle, as the jack touches the
vehicle and begins to fit, double-
check that it is properly positioned.
Rear side only-
When positioning the jack, make sure the
groove on the top of the jack fits as
shown.