Advertisement
Specifications
INPUT SPECIFICATIONS
Input
CHANNEL INPUT
CH1~CH4
MIC CH1
PHONO CH4
EFF RET
REV RET
SUM IN
OUTPUT SPECIFICATIONS
Output
Impedance
STEREO OUT (L, R)
SUM OUT
EFF SEND
PHONES
DIRECT OUT
EXT. SP
Stereo phone jacks is wired:
Tip=Left, Ring=Right, Sleave=Common.
The XLR type connector is electronically balanced.
Appearance
All manuals and user guides at all-guides.com
Actual
For Use
Load
With
Nominal
Impedance
Actual
For Use
Source
With
Nominal
The XLR type connector is wired as follows
Pin No.1-Ground
Pin No.2-Cold (Low)
Pin No.3-Hot (High)
Specifications are subject to change without notice.
Input Level
Nominal
–30dB (24mV)
–60dB (0.78mV)
–55dB (1.4mV)
–20dB (78mV)
–20dB (78mV)
–10dB (245mV)
Output Level
Nominal
+4dB (1.23V)
–10dB (245mV)
–10dB (245mV)
–10dB (245mV)
+4dB (1.23V)
+ 4dB (1.23V)
— 6 —
Connector
MAX. Before Clip
PHONE JACK
0dB (0.775V)
RCA PIN JACK
–30dB (24mV)
XLR-3-31 TYPE
–25dB (44mV)
RCA PIN JACK
PHONE JACK
+ 10dB (2.45V)
PHONE JACK
+ 10dB (2.45V)
PHONE JACK
+ 20dB (7.75V)
0dB is referenced to 0.775V RMS.
Connector
MAX. Before Clip
PHONE JACK
+ 20dB (7.75V)
+ 6dB (1.5V)
RCA PIN JACK
+ 20dB (7.75V)
PHONE JACK
+ 20dB (7.75V)
PHONE JACK
STEREO PHONE
+ 20dB (7.75V)
JACK
+ 20dB (7.75V)
RCA PIN JACK
PHONE JACK
0dB is referenced to 0.775V RMS.
Advertisement
