Advertisement
Contents
Precautions
1. Power Supply
The KD-2 is designed to operate on local AC (50/60Hz) Mains, ±10%.
2. XLR Type Audio Connector
The connectors are wired as follows.
The pin 1 is ground (shield), the pin 2 cold (low, minus), the pin 3 hot (high, plus).
3. Phantom Power Supply
The phantom power switch on channel 1 input permits the user to supply 48V DC
through the input connector to a condenser microphone. If phantom power is not
required, the switch must be in the "off position.
4. Description of components and functions of the KD-2
Various descriptions are applied, depending on each manufacturer. In our
Operating and Instruction Manual explanation of components and functions is
made according to Toa's usage for them.
All manuals and user guides at all-guides.com
- 1 -
1
2
2
3
4
5
5~6
6
Advertisement
