Appearance - Toa KD-1 Operating Instructions Manual

Specifications
INPUT SPECIFICATIONS
Input
Impedance
CHANNEL INPUT
CH1~CH4
MIC CH1
AUX IN
EFF RET
OUTPUT SPECIFICATIONS
Output
Impedance
REG OUT
EFF SEND
HEAD PHONE
EXT. SP
Stereo phone jack is wired:
Tip=Left, Ring=Right, Sleave=Common.
The XLR type connector is electronically balanced.
The XLR type connector is wired as follows
PinNo.1-Ground
Pin No.2-Cold (Low)
Pin No.3-Hot (High)

Appearance

Actual For Use
Load With
Nominal
For Use
Actual
Source With
Nominal
Specifications are subject to change without notice.
Input Level
Nominal
-30dB (24mV)
-60dB (0.78mV)
-20dB (78mV)
-20dB (78mV)
Output Level
Nominal
-10dB (245mV)
-10dB (245mV)
+4dB (1.23V)
50W/8
6
Connector
MAX. Before Clip
PHONE JACK
0dB (0.775V)
RCA PIN JACK
-30dB (24mV) XLR-3-31 TYPE
+10dB (2.45V) PHONE JACK
PHONE JACK
+ 10dB (2.45V)
0dB is referenced to 0.775V RMS.
Connector
MAX. Before Clip
+20dB (7.75V) RCA PIN JACK
PHONE JACK
+20dB (7.75V)
STEREO PHONE
+20dB (7.75V)
JACK
PHONE JACK
0dB is referenced to 0.775V RMS