Preparing For Side Transfer; Headrest - Sunrise Medical SEDEO PRO Instructions For Use Manual

6.3 Preparing for side transfer

DANGER!
• Move your system as close as you can to the seat you are
transferring to. If possible, use a transfer board.
• Transfer as far back onto the seat surface as you can. This
will reduce the risk that you will miss the seat or fall.
CAUTION!
• Some versions of the controller will need to be swung
aside.
• Remove the tray before folding back the armrest.
• Do not lean on the armrest when folded back.
Flip back armrest (Fig 6.4)
1. Press (A).
2. Fold (B) to the rear.
Single post removable armrest (Fig 6.5)
1. Tip (A) downwards.
2. Remove (B).
Reclining flip back armrest (Fig 6.6)
1. Flip (A) to the rear.

6.4 Headrest

Removing / positioning the headrest (Fig 6.7)
1. Loosen knob (A).
2. Slide (B) out of or into bracket (C).
3. Tighten (A).
248020 Rev. C
A
B
2
C
30
2
1
2
1
3
1
A
SEDEO PRO
Fig. 6.4
Fig. 6.5
Fig. 6.6
Fig. 6.7