Using The Timer Programming Feature; Checking A Preset Recording; Cancelling A Preset Recording - Samsung SV-DVD30 Instruction Manual

VCR

Using the Timer Programming Feature

Timer Method
Standard
VideoPlus
GB
PR Day Start Stop Speed V/P
WE 1 19 : 00 19 : 30 SP Off
: :
: :
: :
: :
STANDBY/ON OPEN/CLOSE
17
36
The Timer Programming feature allows you to preset the DVD-
VCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result: The timer selection is displayed.
2 Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is displayed.
3 Press ❿ to select the input source.
4
Select the required station by pressing the ,
❷
INPUT SEL. to select the AV1, AV2 or AUX input sources.
5 Press ❿ to select the recording day.
6
Select the required day by pressing the or
❷
7 Press ❿ to select the recording start time.
8 Select the required hour value by pressing the
9 Press ❿ to select the minutes.
10
Select the required minute value by pressing the
buttons.
Press ❿ to select the recording stop time.
11
12
Select the required recording stop time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
13 Press ❿ to select the recording speed.
14
Press the or buttons to select the SP (Standard Play),
❷
(Long Play), Auto (Auto Tape Speed Select) recording speeds.
15
Press the or buttons to toggle between the PDC
❷
mode (marked On ) and the non PDC mode (marked
16
When you have finished, press the RETURN button.
17 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares
the timer duration with the remaining time on the
cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the
timer recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the DVD-
VCR automatically switches to LP mode to record the
whole programme.

Checking a Preset Recording

You can check your preset recordings:
When you have finished presetting the DVD-VCR
If you have forgotten which programmes will be
recorded
1
Press TIMER on the remote control.
Result:
2 Press the OK button to select
Result:
3 Press the
4 Press the ➛ or ❿ buttons to select and change any values as
buttons or
required. For more details, refer to the previous page.
5
On completion, press RETURN twice.
buttons.
or buttons.
❷
or
❷

Cancelling a Preset Recording

or
❷
You can cancel any programmes that are:
Incorrect
No longer required
1 Press TIMER on the remote control.
LP
Result:
2
Press the OK button to select
Off ). Result:
3
Select the programme to be cancelled by pressing the
buttons.
4 Press the CLEAR button to cancel the selected programme.
Result:
5
On completion, press RETURN twice.
The timer selection is displayed.
Standard option.
The menu is displayed.
TIMER PROGRAMMING
or buttons to select the required programme.
❷
The timer selection is displayed.
Standard option.
The TIMER PROGRAMMING menu is displayed.
or
❷
All the recording information is deleted and the
broadcast will not be recorded.
VCR
PR Date Start Stop Speed V/P
WE 1 19 : 00 19 : 30 SP Off
: :
GB
: :
: :
: :
VCR
PR Date Start Stop Speed V/P
WE 1 19 : 00 19 : 30 SP Off
: :
: :
: :
: :
4
37