Disc Menu Language; Audio Language; Subtitle Language; Dolby Digital Out - Samsung SV-DVD30 Instruction Manual

DVD

Disc Menu Language

Setup
Setup
Display Setup
Setup :
GB
Language Setup
Disc Menu : English
Audio : English
Subtitle : Automatic
Disc Menu Language
Disc Menu
DVD

Audio Language

Language Setup
Disc Menu : English
Audio : English
Subtitle : Automatic
48
To set the Disc Menu Language to your preferred language,
follow these steps. If your preferred language is available on a
DVD, your Disc Menu Language will automatically be set to the
language you choose.
1 Open "MENU"
Press the MENU button while the DVD is in Stop mode.
2 Select "DVD"
Use the or buttons to highlight "DVD Setup,"
❷
❿
then press the OK or buttons.
3 Select "Language Setup"
Highlight "Language Setup", then press the OK or
4 Select "Disc Menu"
❿
Highlight "Disc Menu", then press the OK or buttons.
5 Set "Disc Menu Language" Preference
Highlight your preferred language for disc menus, then press the
OK button.
To set the Audio Language to your preferred language, follow
these steps. If your preferred language is available on a DVD,
your Audio Language will automatically be set to the language
you choose.
1 Open "MENU"
Press the MENU button while the DVD is in Stop mode.
2 Select "DVD"
Use the or buttons to highlight "DVD Setup,"
❷
❿
then press the OK or buttons.
3 Select "Audio"
❿
Highlight "Audio," then press the OK or buttons.
4 Set "Audio Language" Preference
Highlight your preferred language for audio soundtracks, then
press the OK button.

Subtitle Language

To set the Subtitle Language to your preferred language, follow
these steps. If your preferred language is available on a DVD,
your Subtitle Language will automatically be set to the language
you choose.
1 Open "MENU"
Press the MENU button while the DVD is in Stop mode.
2 Select "DVD"
Use the
then press the OK or
3 Select "Subtitle"
❿
buttons.
Highlight "Subtitle", then press the OK or
4 Set "Subtitle Language" Preference
Highlight your preferred language for subtitles, then press the
❿
OK or buttons.

Dolby Digital Out

If your A/V receiver is equipped with a Dolby Digital decoder,
your DVD-VCR can output Dolby Digital 5.1 sound, but you
MUST enable this feature in the menu system to prevent damage
to your speakers.
NOTE: Select "Bitstream" ONLY if you have connected a Dolby
Output
panel.
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
Use the
then press the OK or
3 Select "Audio Setup"
Highlight "Audio Setup", then press the OK or
4 Set "Dolby Digital Out"
Highlight "Dolby Digital Output" then press the
to select one of the following options:
• PCM - To use your DVD-VCR with an A/V receiver NOT
equipped with a Dolby Digital decoder.
• Bitstream – To use your DVD-VCR with an A/V receiver
equipped with a Dolby Digital decoder.
or
buttons to highlight "DVD"
❷
❿
buttons.
❿
buttons.
Digital-equipped A/V receiver to the Digital
(optical or coaxial) on the DVD back
or
❷ buttons to highlight "DVD "
❿
buttons.
❿
buttons.
❿
or OK buttons
DVD
Setup
Setup
Display Setup
Setup :
GB
Language Setup
Disc Menu : English
Audio : English
Subtitle : Automatic
Subtitle Language
Automatic
Subtitle
DVD
Setup
Setup
Display Setup
Setup :
PCM
Dolby Digital Out
Bitstream
MPEG-2 Digital Out
DTS
PCM Down Sampling
49