Using The Tape Counter - Samsung SV-DVD30 Instruction Manual

VCR
Searching for a Specific Sequence
GB
INTRO SCAN :
INDEX SEARCH : - 6
2
2
42
Intro Scan
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2 Press the OK or ❿ .
3 Press the ➛ ➛ ❿ ❿
or buttons depending on the direction
where your desired programme is located.
4
When an Index mark is found the DVD-VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
5 If you want to watch the tape from a particular Index, simply
❿ II
press .
ndex Skip Search:
I
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different
programmes on a tape and you have rewound the tape to the
beginning, by using this feature you can go directly to the start of
programme 2 simply by pressing the SEARCH button.
1 After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2 Press the OK or ❿ .
3
Press the ➛ ➛ ❿ ❿
or buttons twice more. This will take
you directly to the start of the desired programme is located.
4 These Index searches can be made forwards: (press
➛ ➛ ➛ ➛
backwards: (press ). ( -20 0 +20
5 ❿ II
To cancel an Index search simply press the

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record
or
❷ modes (hours, minutes and seconds)
Is reset when a cassette is inserted in the DVD-VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
Press INFO. twice to display the counter
Press CLEAR when you want to set the tape counter to
zero
3 When you are ready,
Start playback or Recording.
Press the
To fast-froward or rewind to the sequence at which the
counter was set to zero, press
Some DVD-VCR information, such as the counter, can
be displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page
29).
or
❷
Press INFO.:
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
❿ ❿ ) or
Four times to clear the display
❿ ❿✌
or button.
button.
➛ ➛ or ❿ ❿ .
VCR
GB
0:00:00
2
43