Table of Contents
Advertisement
01722A SV-DVD1E/XEU-GB1
9/3/02 10:36 PM
Deciding How to Connect DVD-VCR
GB
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector
Location
Type
AV1 (EURO AV) Rear
SCART
AV1 (EURO AV)
AV2 IN
Rear
SCART
AV2 (DEC./EXT.)
Audio input
Rear
Audio RCA
AUDIO
R
IN
L
Audio output
Audio RCA
R
OUT
L
VIDEO input
Rear
RCA
VIDEO
IN
VIDEO output
RCA
OUT
S-VIDEO
Rear
S-JACK
output
S-VIDEO OUT
Digital AUDIO Rear
Optical
output
coaxial
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
OUT TO TV
Rear
75
TV
coaxial
IN FROM ANT. Rear
75
coaxial
Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
10
Page 10
Direction
Recommended Use
In/Out
Television
Satellite receiver
Other VCR
In
Satellite receiver
CANAL/DECODER
Other VCR
In
AUX Audio in
Out
LINE Audio out
In
AUX Video in
Out
LINE Video out
Out
S-Video out (DVD only)
Out
Digital Audio out (DVD only)
Out
Television
In
Aerial
Cable television network
Satellite receiver
Connecting DVD-VCR to the TV using the Coaxial Cable
To receive television programmes a signal must be received from
one of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75 coaxial socket marked
rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the
TV
socket on your
DVD-VCR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the SCART
cable (see section below) if your television is equipped with this
type of connection.
Connecting DVD-VCR to the TV using the SCART Cable
TV
3
SCART Cable
RF coaxial cable
You can connect your DVD-VCR to the television using the SCART cable if the appropriate input is
available on the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your DVD-VCR
Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched
off.
Make sure that both the television and the DVD-VCR are switched off before connecting the
cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the DVD-VCR.
3
Plug the other end into the appropriate connector on the television.
AV2 (DEC./EXT.)
2
TV
AV1 (EURO AV)
on the
TV
AV2 (DEC./EXT.)
TV
4
AV1 (EURO AV)
3
Aerial
AV2 (DEC./EXT.)
S-VIDEO OUT
TV
AV1 (EURO AV)
2
11
GB
Hide quick links:
Advertisement
Table of Contents
