Table of Contents
Advertisement
Inserting Batteries in the Remote Control
GB
You must insert or replace the batteries in the remote control when
you:
1
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and calendar used to:
You must set the date and time when:
CLOCK SET
E N T E R
E N D
:S E T U P
12:00
1/JAN/2001
M O N
AUTO CLOCK : ON
E N D
:S E T U P
18
Purchase the DVD-VCR
Find that the remote control is no longer working
correctly
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
+ on the battery with + on the remote control
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
Do not mix different battery types (manganese and
alkaline for example).
Automatically stop programme recording
Preset your DVD-VCR to record a programme
automatically
You purchase the DVD-VCR
The power supply remains off for more than 6 hours
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually.
Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1
Press SETUP on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
,
or
,
buttons to select the
CLOCK SET
option.
3
Press the ENTER button to select this option.
Result:
The
CLOCK SET
menu is displayed.
4
Press
or
to select the hour, minutes, day, month and year.
Result:
The option selected flashes.
5
Press the
or
buttons to increase or decrease the value.
Result:
The day of the week is displayed automatically.
You can hold the
or
buttons down to scroll more
quickly through the values.
6
On completion, press SETUP twice to exit the menu.
Displaying/Hiding On-Screen Information
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and
Timer functions, which cannot be hidden).
1
Press SETUP on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
,
or ,
buttons to select the
option.
USER SET
3
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is placed
in front of the
option.
O S D
5
To...
Press
or , until...
Display on-screen information
O N
is displayed.
Hide on-screen information
O F F
is displayed.
6
On completion, press SETUP twice to exit the menu.
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
Press SETUP on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
,
or
,
buttons to select the
I N S T A L L A T I O N
option.
3
Press the ENTER button to select this option.
Result:
The
menu is displayed.
I N S T A L L A T I O N
4
Press the
or
buttons, until the cursor is placed in front of the
VCR OUTPUT CH
option.
5
Select the required output channel (CH21~CH69) by pressing the
or
buttons.
6
On completion, press SETUP twice to exit the menu.
Then tune your television again (see page 14).
GB
USER SET
E N T E R
E N D
:S E T U P
O S D
: O N
TAPE SELECT
: E 1 8 0
COLOUR SYSTEM
: A U T O
I P C
: O N
N I C A M
: O N
E N D
:S E T U P
I N S T A L L A T I O N
E N T E R
E N D
:S E T U P
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH
: C H 6 0
E N D
:S E T U P
19
Hide quick links:
Advertisement
Table of Contents
