Settings; Tuning Your Television For The Dvd-Vcr - Samsung DVD-V6800 User Manual

5
The current time and date are displayed
automatically.
SETUP
Time
DVD
12 : 00
VCR
Auto Clock
PROG
FUNC
OK
Check the Date and Time if it is :
• Incorrect, refer to "Setting the Date and
Time". (See page 14)
• Correct, press the RETURN button twice to
exit the menu.
Note
• Now, you only have to switch the DVD-VCR
on and it is ready for use.
• Function for "Plug & Auto Set Up" is fixed already.
So if you want to change this fixed one, you can
change. (refer to "Presetting the Stations Manually"
page 16).
Date Year
01 / 01 2007 MON
: On
Return Menu
S ettings
S ettings
Tuning Your Television for the DVD-
VCR
You must tune your television for the DVD-VCR
only if you are using the RF cable.
To view pictures from your DVD-VCR when a
Scart cable is used, the television must be set to
the audio/video mode (AV).
1
Switch on the television.
2
Switch on the DVD-VCR by pressing the
STANDBY/ON on the front of the DVD-
VCR or STANDBY/ON on the remote control.
3
Select a programme position on the television
to be reserved for use with your DVD-VCR.
4
Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the ‹II button.
5
Start a scan on your television or set the tele-
vision to UHF channel 60.
6
Fine tune the television until the pictures and
sound are obtained clearly.
7
When the picture and sound are perfectly
clear, store this channel at the desired
programme position on the television.
That programme is now reserved for use with
your DVD-VCR.
English - 13